(JDRDIATOOL@163.COM)Diamond blade,polishing pad, hole saw,drill bit, grinding wheel, cutting tools

1. 4" diamond concrete cutting pads 2. diamond concrete cutting pads ,With high diamond concentration inside, the resin bonded serial pads, never use Sic as additive, with aggressive and tenaciously, better heat transmissibility performance, be used or by wet. They are designed for a variety of applications and can be used in the fabrication shop and at the jobsite. They are with the capability for a high glossy degree. . 4. Two polishing speed more and service life than normal resin diamond polishing pads 5. Working layer:2..5mm,2.7mm,3.0mm 6. Diamond grit:30,50,100,200,400,800,1500,3000 7. Back:Velcro FAQ 8. Notice of Usage of our diamond pads: Wear rubber boots, an apron and safety glasses first. Connect a Back Holder to the Polisher, and attach a diamon metal Pad of grit 30 or 50 to the Back Holder. Turn on the water supply. Set the speed at 3,000-4,000RPM and start polishing process. Moving two passes across and one pass up and down is a good tec

Choosing the right diamond blade cannot be stressed enough when it comes to doing construction jobs. With the right diamond blade , fast and efficient cutting can be accomplished while using the wrong diamond blade can only result to damage and danger in the workplace. Here are the different types of diamond blades according to category and materials. 1. Laser welded diamond blades – Diamond blades that are laser welded are more appropriate for cutting through asphalt,green concrete, reinforced concrete, metals, and other abrasive or dense materials. They are often used with extremely hard or abrasive cutting surfaces. 2. Sintered diamond blades – These types of diamond blades are used for minor jobs involving general purpose cutting of concrete, brick, block, and stone. Note that continuous rim blades are sintered because they do not have the capability of being laser welded, such as segmented diamond blades. 3. Silver brazed diamond blades – Often used for cuttin