Posts

Showing posts from March 14, 2019

Diamond core bit drilling tips & trouble shooting B

Image
Symptom:Loss of diamond segment Cause:a.diamond core drill bit too hard for the material it is drilling, causing it to pound and fatigue.            b.Overheating due to insufficient water for cooling and flushing.            c.Machine setup is not rigid or loose material is in the cut and the bit segment hangs.            d.Shooting cable, when drilling pre-stress. Remedy:a.Use a softer bond for diamond core drill bit if possible.  Increase motor RPM if possible.              b. Increase water flow to where slurry is milky and flows easily.              c.Tighten anchor, check vacuum system for proper vacuum pressure.              d.Use a bit with more segments, such as a  pre-stressed diamond core bit Concrete core drill bit

Diamond core bit drilling tips & trouble shooting C

Image
Cause:a.diamond core drill bit  is too hard for the material being drilled.             b.Drill Machine setup is not rigid. Remedy:a.Use a softer bit if possible. Increase motor RPM.              b.Tighten anchor, check vacuum system. diamond core drill bit