(JDRDIATOOL@163.COM)Diamond blade,polishing pad, hole saw,drill bit, grinding wheel, cutting tools

Choosing the right diamond blade cannot be stressed enough when it comes to doing construction jobs. With the right diamond blade , fast and efficient cutting can be accomplished while using the wrong diamond blade can only result to damage and danger in the workplace. Here are the different types of diamond blades according to category and materials. 1. Laser welded diamond blades – Diamond blades that are laser welded are more appropriate for cutting through asphalt,green concrete, reinforced concrete, metals, and other abrasive or dense materials. They are often used with extremely hard or abrasive cutting surfaces. 2. Sintered diamond blades – These types of diamond blades are used for minor jobs involving general purpose cutting of concrete, brick, block, and stone. Note that continuous rim blades are sintered because they do not have the capability of being laser welded, such as segmented diamond blades. 3. Silver brazed diamond blades – Often used for cuttin...

How to use diamond blade by wet or dry operation Wet Diamond blade products must be used with water to keep the segments cool during operation. Water also assists the product to perform at its max, efficiency. Cutting without water on the products will cause excessive heat resulting in poor performance and diamond blades damage in the form of cracks in the steel center. For concrete floor saws , wet cutting is usually preferred because you can cut deeper when using water as a coolant. For tile and masonry saws,either wet or dry cutting tools can be used. Dry diamond blade  products must be cooled with airflow around the tool to dissipate the heat.Dry cutting blades are only reccommended for intermittent cutting. Every 10-15 minutes the diamond blades should be allowed to rotate out of the cut at maximum rpm for serveral seconds to allow the blade to cool. Operators of diamond blade should not use dry diamond blades for long continuous full depther sawing in ...

Processing Method       Binding Strength of the segment(rim) and steel core                Dry cutting result Laser Welded                    ▲▲▲▲                                                                        ▲▲▲▲ Hot pressed                       ▲▲▲           ...