Diamond Blade Trouble Shooting Overheated
Symptom:Overheated Cause: Adequate coolant was not provided.
Remedy:Check the water supply for adequate volume and for obstructions in the water system. Use dry blades ONLY for shallow cutting (1-2” deep) or step cutting. Allow blade to run freely every 10 to 15 seconds in order to increase cooling air flow.
For more information, please click here
Remedy:Check the water supply for adequate volume and for obstructions in the water system. Use dry blades ONLY for shallow cutting (1-2” deep) or step cutting. Allow blade to run freely every 10 to 15 seconds in order to increase cooling air flow.
For more information, please click here
 |
| Diamond blade |
Comments
Post a Comment
Please make some comments on them. Thanks!!!