Diamond Blade Trouble Shooting core cracked
Symptom: diamond blade core cracked
Cause: a.diamond Blade is too hard for material being cut.
b.Excessive cutting pressure, or jamming or twisting the blade in the cut can cause the blade core to band or flex. When subjected to extreme stress and metal fatigue, the blade’s steel core will eventually crack.
c.Overheating through inadequate water supply or improper use of dry cutting blades.
Remedy:a.Use correct diamond blade with softer bond.
b.The saw operator should use steady, even infeed pressure, and be careful not to twist or jam the blade in the cut.
c.Use adequate water to cool wet-cutting diamond blades (for example, 2-5 gallons per minute for concrete saws). Allow adequate airflow around dry-cutting diamond blades to prevent overheating. NEVER USE A BLADE WITH A CRACKED CORE!
Cause: a.diamond Blade is too hard for material being cut.
b.Excessive cutting pressure, or jamming or twisting the blade in the cut can cause the blade core to band or flex. When subjected to extreme stress and metal fatigue, the blade’s steel core will eventually crack.
c.Overheating through inadequate water supply or improper use of dry cutting blades.
Remedy:a.Use correct diamond blade with softer bond.
b.The saw operator should use steady, even infeed pressure, and be careful not to twist or jam the blade in the cut.
 |
| hot pressed diamond blade |
Comments
Post a Comment
Please make some comments on them. Thanks!!!