Diamond Trouble Shooting Diamond Segment Loss E
Symptom: Diamond segment Loss
Cause:Overheating can usually be detected by blue color on steel center and generally confined to the area where the segment was lost.
Remedy:Check the water system for blocked water passages. Test pump to see if it is functioning. For dry cutting, it may be necessary to make shallower cuts and allow the blade to run freely every few minutes in order to let the air cool it.
Cause:Overheating can usually be detected by blue color on steel center and generally confined to the area where the segment was lost.
Remedy:Check the water system for blocked water passages. Test pump to see if it is functioning. For dry cutting, it may be necessary to make shallower cuts and allow the blade to run freely every few minutes in order to let the air cool it.
 |
| Diamond segment |
Comments
Post a Comment
Please make some comments on them. Thanks!!!