(JDRDIATOOL@163.COM)Diamond blade,polishing pad, hole saw,drill bit, grinding wheel, cutting tools

Diameter (Inches) Wall  Hand Saw Blades                               Cutting Depth 14”                                                                    4-5/8” 18”                                                       ...

PROBLEM:       Diamond wheel  Burning (excessive heat)      POSSIBLE CAUSES:    Diamond Wheel loaded or glazed,      Excessive feed rate,       Diamond Wheel too durable SUGGESTED CORRECTIONS:Dress Diamond wheel with a dressing stick,Reduce in-feed of Diamond wheel or work piece,Use freer cutting specification or  slow down wheel speed Diamond wheel        

Rules of Thumb for diamond grinding wheel  : Coarse Grits: Best life and stock removal rate, good form holding Fine Grits: Low stock removal, best finish and good life High Diamond Wheel Speed: Better finish and form holding, hard acting Low Diamond Wheel Speed: Worse finish and form holding, softer acting, shorter life High Diamond Concentration: Longer life, better form holding, harder acting Low Diamond Concentration: Shorter life, soft acting Diamond Wheels: Wet = 5500 - 6500 SFPM; dry = 3500 - 4500 SFPM CBN Wheels: Wet grind = 6500 - 9500 SFPM Water Coolant: Highest stock removal rate, fair finish Oil Coolant: Lower stock removal rate, better finish Diamond grinding wheel

Aluminum Backer Pads with hook and rubber interlayer or without interlayer, Maximum 11000 RPM Item Thread Product Number         3" 4" 5" 6" 7" Rubber interlayer 5/8"-11 3ORALRE58 4ORALRE58 5ORALRE58 6ORALRE58 7ORALRE58 Without interlayer 3ORALE58 4ORALE58 5ORALE58 6ORALE58 7ORALE58 Rubber interlayer M14 3ORALRM14 4ORALRM14 5ORALRM14 6ORALRM14 7ORALRM14 Without interlayer 3ORALM14 4ORALM14 5ORALM14 6ORALM14 7ORALM14 Rubber interlayer M16 3ORALRM16 4ORALRM16 5ORALRM16 6ORALRM16 7ORALRM16 Without interlayer 3ORALM16 4ORALM16 5ORALM16 6ORALM16 7ORALM16

when we use normal diamond pad to mount on Edge polishing machine, we have to use snail lock pad or Aluminum Snail Lock Adapter for diamond pad  Snail lock back up pad Thread Part No. 4" 5/8"-11 4SLE58 M14 4SLM14 M16 4SLM16

Diameter (Inches)                                      Cutting Depth High-Speed Saw Blades 12”                                                                      4” 14”                                                ...

Diameter (Inches)                                      Cutting Depth Masonry Saw Blades 14”                                                            5” 18”                                                           ...