(JDRDIATOOL@163.COM)Diamond blade,polishing pad, hole saw,drill bit, grinding wheel, cutting tools

1. Diamond Grinding wheel Troubleshooting Guide: Wet Grinding D 2. Problem:Slow cutting,Short diamond wheel life 3. Possible causes:Low feeds and speeds,Incorrect coolant flow,   Excessive dressing, Diamond  Diamond Wheel too soft  or too hard 4. Suggested corrections: Increase feed rate, increase wheel speed (observe maximum wheel speed), Apply coolant to flood wheel/work surface,  Increase wheel speed, Use lighter dressing pressure, Change grit or grade, use higher  hard concentration

1. Diamond grinding wheel Trouble Shooting Guide:Wet Grinding  2.Problem:Chatter, Diamond Wheel will not cut 3. Possible Causes:Diamond Wheel out of truth,Glazed by truing  Wheel loaded 4. Suggested corrections: True wheel, ensure it’s not slipping  on mount, Dress lightly until wheel opens up Dress lightly until wheel opens up  Increase coolant flow to keep  wheel surface clean  Never run wheel with coolant turned off

A diamond blade is a saw blade which has diamond fixed on the blade's base  or the core to use the diamonds to cut hard or abrasive materials. There are many types of diamond blades, and they have been applied in many industries, for example, construction industry to cut stone, concrete, asphalt, bricks,  glass and ceramics, IT industry to cut semiconductor materials, and gem industry to cut gem stones including diamonds.  Diamond blade  laser welded diamond blade

.Diamond pads are widely used in Stone, Flooring and construction industries. In this situation, they can be divided into as following main styles: 1. Diamond pads for polishing granite 2. Diamond pads for polishing marble 3. Diamond pads for polishing concrete 4. Diamond pads for polishing engineered stone Also the diamond grits are 30#,50#,100#,200#,400#,800#,1500#,3000# If someone need more information, please contact us for details at jdrdiatool@yahoo.com.cn . 

Diameter (Inches) Wall  Hand Saw Blades                               Cutting Depth 14”                                                                    4-5/8” 18”                                                       ...

PROBLEM:       Diamond wheel  Burning (excessive heat)      POSSIBLE CAUSES:    Diamond Wheel loaded or glazed,      Excessive feed rate,       Diamond Wheel too durable SUGGESTED CORRECTIONS:Dress Diamond wheel with a dressing stick,Reduce in-feed of Diamond wheel or work piece,Use freer cutting specification or  slow down wheel speed Diamond wheel        

Rules of Thumb for diamond grinding wheel  : Coarse Grits: Best life and stock removal rate, good form holding Fine Grits: Low stock removal, best finish and good life High Diamond Wheel Speed: Better finish and form holding, hard acting Low Diamond Wheel Speed: Worse finish and form holding, softer acting, shorter life High Diamond Concentration: Longer life, better form holding, harder acting Low Diamond Concentration: Shorter life, soft acting Diamond Wheels: Wet = 5500 - 6500 SFPM; dry = 3500 - 4500 SFPM CBN Wheels: Wet grind = 6500 - 9500 SFPM Water Coolant: Highest stock removal rate, fair finish Oil Coolant: Lower stock removal rate, better finish Diamond grinding wheel