(JDRDIATOOL@163.COM)Diamond blade,polishing pad, hole saw,drill bit, grinding wheel, cutting tools

Diamond blade problems  are  mainly caused by the three reasons as below: 1.Using the wrong diamond blade for the job 2.Using the diamond blade improperly 3.Equipment problems Diamond blade

Diamond drill speeds vary depending upon the manufacturer and type of diamond drill. Diamond Core Drill Bits , for use on glass, stone and tile should be used at slow to very slow speeds, with the speed decreasing as the hardness of the material increases. The performance of diamond core drill bits will be enlarged by using the following drill speeds. Recommended Drill Speeds Diamond Drill Bits                                                   Recommended Drill Speed (rpm) Material Bit Size -->                                       ...

This diamond blade trouble shooting guide will help you identify, diagnose and correct diamond blade problems. The following are samples of some of the problems you may encounter in the field, with a cause and remedy guide to diagnose and correct these of some of the problems you may encounter in the field, with a cause and remedy guide to diagnose and correct these problems. Symptom: Loss Tension of diamond blade Cause: Diamond Blade being used on misaligned saw. Remedy:Check for proper saw alignment. Diamond cutting disc

They are Four Grades for diamond blades  to meet different demand from our cutomers: A) Professional Purpose diamond blade : for large civil engineering construction on a regular daily basis, require long life(Less expensive per cut/meter) and fast cutting speed. B) Builder's (Contractor) Purpose diamond blade : for regular cuse with medium life, fast cutting speed no need the same life of a Professional Blade. C) DIY Purpose Diamond blade : For small scale occasional use, require fast cutting speed and reasonable life D) Promotional Purpose diamond blade :cut well with water but with short life. Diamond blade

Diamond Blade  with continuous smooth rim provides the smooth cut in ceramic tiles and ornamental stone. Diamond Blade with Segmented or Turbo type may produce slight chipping but generally have a longer life and lower cost per cut than continous rim blades. Segmented Diamond blades provide the longest and lovest cost per cut but only suitable for work where chipping is not a problem.                                                          Segmented                                   Turbo       ...

                                                           Professional          Builder             DIY            Promotional Diamond blade's working Life             ▲▲▲▲          ▲▲▲            ▲▲                 ▲ Diamond blade's Cutting speed         ...

adapters for diamond cup wheel and blade When we want our diamond cup wheel to mount on Angle grinder, we have to use the Adapters for fitting M14 or 5/8"-11 Thread. Then diamond cup wheel is very easy to fix on the Angle grinder.